Additional Services

This page uses JavaScript, so you need to get a browser such as Netscape Communicator™ 4.0 or later or Microsoft® Internet Explorer™ 4.0 or later that supports JavaScript. If you have JavaScript disabled in your browser, you will need to turn it on in order to use this Web Site.

IMPELLERS
It was a natural evolution for
Padgett-Swann Machinery to addimpellers to its product line due to the company’s expertise in casting and repairing marine propellers.

We repair all types of impellers - from 9” to 180” - in all types of materials using the same repair techniques, alloys, expertise, and skill required to repair propellers. Customers in pump manufacturing, power plants, wastewater treatment, phosphate mines, and chemical plants have discovered that use of these same time-tested techniques enhance the performance of the impeller tremendously. Repairs are performed economically, efficiently, and expertly, thus cutting maintenance costs, extending the life of the impeller, and improving the performance of the pump. New impellers cast in stainless steel and various other alloys are also available.

PUMP COMPONENT FABRICATION AND REPAIR

A core focus of the business is overhauling and repairing various types of umps. Padgett- Swann Machinery overhauls dozens of deep-well pumps each year, including ballast, cargo and fire pumps.

Deep-well pump

Pump components are manufactured on-site, including shafts, bushings, wear rings, housings and transitions.
We also offer fieldwork, including line boring and flange facing. Whether in the shop or on the road, Padgett-Swann Machinery
has the answer to your pumping problems.

VALVES

Padgett-Swann
Machinery manufactures
and repairs 18”
through 36” wedge
and knife gate valves
for the dredging and
phosphate industry.

As a result of over fifty years of performing these services
the company has developed an unparalleled expertise
and knowledge in this area. The use of special coatings
and ceramics prolong the life of the valve, reduce
maintenance costs, and reduce down time.

The following is a partial list of our machinery and capabilities:

• 60” Engine Lathe - 72” swing x 660” bed length with 48” swing over the carriage
• 66” x 240” Gap-Bed Lathe - 96” x 96” gap and 54” swing over the carriage
• 42” Engine Lathe - 50” swing, 324” bed length and 32” swing over the carriage
• Engine Lathe - Geared head, 28” swing x 15’ centers; taper attachment, steady rest, and 24” 4-jaw chuck
• Gap-Bed Engine Lathe - 21” swing x 80” centers; taper attachment, steady rest, 12” 4-jaw chuck, and 3-1/2” hole
• Gap-Bed Engine Lathe - 40” swing x 16’ centers; steady rest, 24” 4-jaw chuck, geared head, 2-7/8” bore hole, 40” swing over gap
• Gap-Bed Engine Lathe - 24” swing over cross slide, 34” swing in gap, 80” centers; compound tool post, steady rest, 12” 3-jaw chuck, 18” 4-jaw chuck, cross slide and in-feed
• Vertical Boring Mill - Capacity up to 96” diameter, 60” high; Two 66” vertical mills
• Horizontal Boring Mill - 4” spindle, 120” cross travel, 84” vertical travel
• Internal and External Grinding
• Universal Milling Machines - Through 18” x 84” Table Capacity
• Saw Capacity - Through 24” Diameter
• Radial Drilling Capacity - 5” diameter hole with 84” arm
• Portable Machining Equipment - Including Boring Bars, Portable Milling, Portable Keyway Mills, Portable Pressing Equipment, and Magnetic Drills
• Stress-Relieving Ovens - Accommodates sizes up to 120” x 144” x 120”
• Vibratory Stress Relief Equipment - With Digital Charts
• Submerged Arc Welding Machine - Capable of handling 24” O.D. x 600” long
• Bridge Crane - Two 20-Ton; double girder, 70’ span, 180’ travel, 6-Speed, double block, cable lift
• Bridge Crane - 10-Ton; single girder type, 70’ span, 180’ travel
• 500-Ton Horizontal and 500-Ton Vertical Presses
• Mitts & Merrill 6A Hydraulic Keyseater - Capable of cutting 3-1/2” key, 38” long

(813) 247-3478 • 5128 36th Avenue South, Tampa, FL 33619